Classic Fixer · Knoxville, Tennessee
New Homeowner Maintenance Checklist
Before changing paint colors or buying new furniture, learn how the house works. Locate the controls, document the equipment, address anything that can cause water or safety damage, and turn everything else into a prioritized list.
Your first 24 hours: learn how the home responds
Before unpacking every box, take one deliberate walk through the property. The goal is not to find every cosmetic flaw. It is to understand how to stop water, shut off power, secure the building, and reach the equipment that keeps the home operating.
Bring your phone, the inspection report, a flashlight, painter’s tape, and a notepad. Photograph locations that would be difficult to explain during an emergency, and do not cover important valves, panels, cleanouts, or equipment with stored belongings.
- Confirm every exterior door locks and every provided key, remote, and garage control works.
- Locate the main water shutoff and photograph both the valve and the path used to reach it.
- Locate the electrical panel, verify the door opens freely, and keep the area in front of it clear.
- Find smoke alarms, carbon-monoxide alarms, fire extinguishers provided with the home, and bedroom escape routes.
- Identify the HVAC thermostat, return grilles, filter location, and the equipment disconnect without removing covers.
- Write down the electric, water, gas, sewer or septic, trash, HOA, insurance, and emergency contact information.
Locate and label the controls
A shutoff is useful only if the household can find it and operate it safely. Labels should identify what a valve or breaker controls without encouraging anyone to handle unfamiliar equipment. Show every responsible adult where the controls are and include the locations in your home record.
If a valve is corroded, leaking, buried, inaccessible, or will not move with normal hand pressure, do not force it. Have the correct trade evaluate it before an emergency.
- Main water shutoff where the service enters the home; meter-side valve identified separately.
- Individual shutoffs at toilets, sinks, washing machine, refrigerator, dishwasher, and water heater.
- Electrical main and branch panel, with missing or inaccurate circuit labels placed on the repair list.
- GFCI receptacles in kitchens, baths, garage, exterior, laundry, basement, and crawlspace areas.
- Gas meter and appliance shutoffs identified for location only; report odor immediately and follow utility emergency guidance.
- Exterior hose bib shutoffs, irrigation controls, septic equipment, sump-pump receptacles, and well equipment when present.
Create a home record you will actually maintain
A useful home record is a simple folder—digital, paper, or both—that answers what the equipment is, when it was serviced, which materials were used, and what changed. Photograph data plates straight on with enough light to read the model and serial numbers.
Save the original inspection report, but turn its recommendations into a separate action list. An inspection describes conditions on one day; your record should show what was repaired, who performed it, and what remains.
- HVAC model and serial numbers, filter dimensions, thermostat information, and service history.
- Water-heater type, fuel, capacity, manufacture date, warranty, shutoff location, and service notes.
- Appliance models, manuals, purchase records, and warranty contacts.
- Roof age, gutter work, window information, flooring manufacturer, cabinet information, and exterior finishes.
- Paint brand, color name, formula, sheen, room, and date—not just a photo of the wall.
- Invoices, permits when applicable, before-and-after photos, and the contact information for each responsible provider.
Handle active water and moisture risks first
Water can damage flooring, cabinets, drywall, framing, and belongings long before a problem looks dramatic. Begin with a dry-paper-towel check under accessible sinks and around supply connections, then look for staining, swelling, corrosion, or odor.
A stain does not prove a leak is active, and painting over it does not solve the cause. Document the location, compare it after rain or fixture use, and arrange proper evaluation before closing cavities or installing new finishes.
- Run each sink while watching the faucet base, supply lines, drain connections, disposal, and cabinet floor.
- Flush toilets and check for rocking, continuous running, weak refill, moisture at the supply, or water around the base.
- Inspect the washing-machine hoses, refrigerator connection, dishwasher area, water-heater pan, and nearby flooring.
- Look below bathrooms and kitchens for ceiling stains, soft drywall, peeling paint, or previous access patches.
- Check tubs, showers, backsplashes, counters, windows, and exterior penetrations for failed or missing sealant.
- Confirm gutters are clear enough to function and downspouts discharge away from the foundation rather than beside it.
Test safety devices and basic household protection
Use the manufacturer’s built-in test control for smoke and carbon-monoxide alarms when it is safe to do so. Record the manufacture or replace-by date visible on each device, because a successful test button does not make an old device new.
Requirements and recommended locations vary with the home, fuel-burning equipment, attached garages, product instructions, and applicable rules. Missing, damaged, painted-over, chirping, or outdated devices should be placed at the top of the correction list.
- Smoke alarms present in bedrooms, outside sleeping areas, and on levels as applicable to the home.
- Carbon-monoxide alarms considered where fuel-burning equipment, fireplaces, or an attached garage are present.
- Bedroom windows and doors open, close, lock, and provide a clear path for emergency exit.
- Stairs, guards, railings, decks, porches, and walkways checked for movement or obvious trip hazards.
- Fire extinguishers, if provided, checked visually for location, damage, gauge position, and service tag only.
- Classic Fixer does not inspect, recharge, or certify extinguishers; concerns belong with a qualified fire-protection provider.
Establish the HVAC, ventilation, and humidity routine
A new homeowner should know the correct filter size, how the filter is oriented, and what normal heating and cooling operation sounds like. A severely dirty filter can reduce airflow, but replacing it will not correct a refrigerant, electrical, drainage, or equipment problem.
Bathrooms, kitchens, laundry areas, crawlspaces, basements, and attics all manage moisture differently. Pay attention to persistent condensation, musty odor, peeling coatings, sweating ducts, or exhaust fans that do not move air.
- Install or confirm the correct HVAC filter and write the size and replacement date on the home record.
- Keep return grilles, supply registers, outdoor equipment, and service access clear.
- Operate bathroom exhaust fans and confirm they sound normal and appear to move air.
- Check the HVAC condensate route and nearby surfaces for overflow staining or active moisture.
- Know whether the home has a sump pump, dehumidifier, whole-house humidifier, or condensate pump and who services it.
- Schedule qualified service when equipment trips breakers, leaks, smells hot, ices over, or cannot maintain temperature.
Walk the exterior with drainage in mind
Exterior maintenance is mostly about controlling water and catching movement early. Walk after a normal rain if possible. Look for overflowing gutters, water collecting at the foundation, erosion, loose components, damaged sealant, and vegetation blocking access or holding moisture against the home.
Observe the roof from the ground. Do not climb onto a roof or use an unsafe ladder to complete a homeowner checklist.
- Gutters, downspouts, extensions, splash blocks, and visible discharge paths.
- Grading, low areas, retaining conditions, crawlspace vents or doors, and basement window wells.
- Siding, brick transitions, fascia, soffit, exterior trim, and visible penetrations.
- Exterior doors, thresholds, weatherstripping, caulk joints, windows, screens, and locks.
- Deck boards, steps, handrails, guardrails, porch columns, and fasteners for visible looseness or deterioration.
- Hose bibs, irrigation heads, exterior receptacles, light fixtures, and dryer or bath exhaust terminations.
Turn the inspection report into a working plan
Do not treat every report item as equally urgent. Separate conditions that can hurt someone or cause rapid damage from routine function issues and cosmetic improvements. Note which items require a plumber, electrician, HVAC contractor, roofer, structural professional, pest provider, or other specialist.
For each item, record the room or exterior side, the exact condition, the desired result, a photo, the responsible person, and the target date. This turns a long report into work that can be estimated and scheduled.
- Immediate: active leaks, electrical warning signs, gas odor, failed exterior locks, loose guards or railings, and active water intrusion.
- First 30 days: recurring drainage issues, damaged supply lines, failed ventilation, unsafe access, and equipment problems.
- Days 31–60: sticking doors, failed caulk, damaged trim, small drywall repairs, loose hardware, and nonworking fixtures.
- Days 61–90: painting, shelving, mounting, organization, comfort improvements, and cosmetic upgrades.
- Monitor: stable conditions that do not require immediate work but should be photographed and checked again.
- Group compatible small repairs into a punch-list visit so access, setup, materials, and travel are used efficiently.
Build a simple recurring schedule
The first-year checklist becomes valuable when it turns into a routine. Choose one day each month for a quick water and safety walk, then place seasonal exterior and equipment reminders on the calendar.
Your schedule should follow manufacturer instructions and the actual conditions of the home. Homes with pets, renovation dust, heavy equipment use, mature trees, crawlspaces, wells, septic systems, or known drainage issues may need more frequent attention.
- Monthly: look under sinks, around toilets and appliances, review alarms for warning signals, and scan ceilings for new staining.
- Filter interval: inspect regularly and replace according to equipment needs, filter type, household conditions, and manufacturer guidance.
- Spring: drainage, exterior sealants, cooling operation, hose bibs, screens, and storm-related damage.
- Summer: humidity, condensate drainage, bath ventilation, exterior wood, and vegetation near the building.
- Fall: gutters, heating readiness, weatherstripping, exterior water preparation, and safe access lighting.
- Winter: freeze protection, unusual drafts, roof or gutter concerns from the ground, and prompt attention to water-line warning signs.
Quick checklist
- Label main shutoffs and panel
- Test smoke and carbon-monoxide alarms
- Replace or confirm HVAC filter
- Check sinks, toilets, and water heater for leaks
- Review gutters, downspouts, and exterior drainage
- Start a prioritized punch list
- Photograph equipment data plates